Best Local LLM for SillyTavern vs a Hosted Endpoint
Searches for best local llm sillytavern have one honest answer: the largest model that fits your graphics card with enough room left for context, and for many people that is a smaller model than they hoped for. This page helps you size that choice and compare it with a hosted endpoint.


Updated
Key points
- Local models are limited by VRAM: weights plus the context cache must both fit.
- Running locally gives you privacy, no usage bill and offline use; hosting gives you a larger context and no hardware.
- SillyTavern supports both, so you can test a hosted endpoint in minutes before buying a GPU.
- At typical heavy roleplay use, hosted tokens cost about $11.55 a month at $0.15 and $0.50 per 1M.
What decides a local model's usefulness
Three limits shape the experience, and they are all hardware limits.
Weights must fit in memory
A model with N billion parameters needs memory for its weights. In 16-bit form that is about 2 GB per billion parameters. Quantized to 4 bits, which most local users do, it is roughly 0.5 to 0.6 GB per billion. A 8B model then needs about 5 GB, a 24B to 32B model needs 14 to 20 GB, and a 70B model about 40 GB. These are rules of thumb; quantization format and file size vary, so check the actual file size on the download page.
Context uses memory too
Every token in the conversation takes space in the key-value cache. A long roleplay with 16,000 or 32,000 tokens of history can take several gigabytes on top of the weights. Many people load a model, find that it fits, and then run out of memory a few hundred messages into a chat. Leave headroom.
Speed depends on where the model lives
If the whole model sits in GPU memory, replies are quick. If layers spill into system RAM, generation slows sharply. A model that "technically runs" at two tokens per second is a poor chat partner.
So the practical question is not "which model is best" but "which size class fits my card with context to spare". Community leaderboards and recommendation threads change month to month, and they are opinion, so verify with your own prompts.
A rough guide by hardware
| Your GPU memory | Realistic model size (4-bit) | What to expect |
|---|---|---|
| 6 to 8 GB | 7B to 8B | Fast, short context, simpler prose |
| 12 to 16 GB | 12B to 14B | Good balance for casual roleplay |
| 24 GB | 24B to 32B | The usual sweet spot for enthusiasts |
| 48 GB or more | 70B class | Needs two cards or a workstation card |
| No GPU | Small models on CPU | Slow; fine for testing, tiring for daily use |
For running them, the common choices are Ollama, KoboldCpp, llama.cpp and text-generation-webui. SillyTavern connects to each through its API settings. KoboldCpp is popular with roleplay users because it exposes sampler options and handles long contexts well, but any of them works.
These figures are guidelines, not benchmarks. If you find a model that fits, try it for a week of real chats before you decide it is the one.
Where a hosted endpoint wins
Hosted means a server runs the model and you call it over HTTPS. SillyTavern supports OpenAI-compatible endpoints, so this one works with a base URL, a key and a model name. The settings are in SillyTavern's API connection panel; pick the custom or OpenAI-compatible chat completion source and enter:
- URL:
https://api.unrestrictedaimodels.com/v1 - Key: the key from your dashboard
- Model:
uncensored
Advantages over local:
- Context. The window is 100,000 tokens (prompt plus reply), well beyond what most home GPUs hold.
- No hardware. It works on a laptop, a tablet browser or a phone.
- No heat or noise, and no electricity cost at your end.
- Nothing to maintain. You do not update drivers, re-download files or tune settings for memory.
The model is tuned to answer without content refusals for lawful adult use. Prompts are not used for training. The SillyTavern vs Janitor AI page explains how the front ends differ.
Where local wins
Being fair, local has real strengths.
- Full privacy. Nothing leaves your machine.
- Offline use. A plane, a cabin or a blocked network is no obstacle.
- No per-token cost once the hardware is paid for.
- Total choice. You can try hundreds of community fine-tunes, merges and LoRAs and switch between them. A hosted endpoint like this one offers a single model.
- Control over samplers and the whole stack, which tinkerers enjoy.
If the hobby for you is the model itself, trying new releases and comparing them, local is the right home. If the hobby is the stories and characters, the model is a means and a stable hosted one saves time.
The cost comparison, with numbers
Take a heavy user: 200 messages a day, 12,000 tokens of context on each, 250 tokens of reply. For a 30-day month:
Input: 200 x 12,000 x 30 = 72,000,000 tokens -> 72 x $0.15 = $10.80
Output: 200 x 250 x 30 = 1,500,000 tokens -> 1.5 x $0.50 = $0.75
Total: $11.55 per month
A lighter user with 50 messages a day pays about a quarter of that, near $2.89. Credit never expires, and top-ups start at $20, so there is no monthly commitment; see the pricing page.
For local, count what you own. If you already have a 24 GB card for other reasons, the marginal cost is electricity. A system drawing 350 W for 3 hours a day uses 0.35 x 3 x 30 = 31.5 kWh a month; multiply by your local rate. If you would have to buy the GPU just for this, compare its price (check current listings) with the monthly figure above; the hosted option stays cheaper for a long time at normal use.
SillyTavern settings that matter either way
Whichever backend you choose, a few SillyTavern settings decide how the chat feels.
- Context size. Match it to what the backend really supports. A local model loaded with 8,192 tokens of context will ignore a setting of 32,000. For the hosted API, the ceiling is 100,000 tokens including the reply, so leave room for the response.
- Response length. A few hundred tokens is enough for most turns. Long replies are slow on small local cards and cost more output tokens on hosted ones.
- Streaming. Turn it on. You see text immediately and can stop a bad reply early.
- Lorebooks and summaries. These keep a story consistent without pushing the whole history into every prompt, which helps with VRAM locally and with cost when hosted.
- Samplers. Start with a temperature near 0.8 and change one value at a time. Local backends expose more samplers than a chat completion API does, which is one reason enthusiasts prefer them.
If you switch from local to hosted, expect to re-tune the first two. A hosted model with a large window rewards a bigger context setting and a good summary habit; a small local one rewards short prompts and tight character cards.
How to decide, and how to test cheaply
- List your hardware. If you have under 12 GB of VRAM, a local setup will be limited in context and prose quality, and hosted is likely better.
- Decide what matters more: privacy and offline use, or long context and zero setup.
- Try the hosted endpoint first. Create a key and claim the $0.50 trial credit with one click; it needs no card and lasts 7 days. At the light-use rate above, that covers several days of casual chatting.
- Download a local model that fits your card and run the same character and scene. Compare reply quality, speed and how long the memory holds.
Many users keep both: local for private or offline sessions, hosted for long adventures that need a huge context. SillyTavern lets you save separate connection profiles, so switching takes a few clicks. For a wider look at building chat setups, read the chatbot guide.
More guides
Questions and answers
How much VRAM do I need for SillyTavern?
For a 4-bit 8B model, about 6 to 8 GB with a modest context. For 24B to 32B models plan on 24 GB, and leave room for the context cache.
Can I use SillyTavern with this hosted API?
Yes. Add it as an OpenAI-compatible chat completion source with the base URL https://api.unrestrictedaimodels.com/v1, your key and the model uncensored.
Is the hosted model the same as a local one?
It is a single open-weight model run by an independent provider, not an official API of any big vendor and not a router across vendors. Local setups let you choose among many models.
What is the context limit on the hosted API?
100,000 tokens for prompt plus reply. Local limits depend on your memory and the model you load.
Your key is one form away
Create an account, copy the key, change the base URL. That is the whole setup.
Get API key